WirelessHART Fieldgate SWG70 Instructions d'exploitation Page 34

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 124
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 33
7 Commissioning WirelessHART Fieldgate SWG70
32 Endress+Hauser
7.3 RS-485 connection
Once the gateway has been connected to the RS-485 bus (see Chapter 5.4), you may connect the
RS485 bus to your PC. This can be done by using a RS485–RS232 converter or a RS485–USB
converter.
Procedure 1 Connect the RS-485–RS-232 converter or the RS-485–USB converter to your PC.
2 In the case of the RS-485-USB converter install any driver that is delivered with the device.
3 To find out to which COM port the converter is connected, open the Windows device manage.
e.g. for Windows XP:
Start > Settings > Control Panel > System > Hardware > Device Manager.
4 Under "Ports (COM & LPT)" you should see the converter and the COM port assigned to it
5 Note the COM port (in this case USB Serial Port (COM5)) and the baudrate etc. as you will
need them to set up communication
Vue de la page 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 123 124

Commentaires sur ces manuels

Pas de commentaire